{
 "sets": [
  {
   "id": "a1-04",
   "printer": "Bambu Lab A1",
   "nozzle": "0.4",
   "machine": "Bambu Lab A1 0.4 nozzle",
   "filament": "Bambu PLA Basic @BBL A1",
   "default": "0.20mm Standard @BBL A1",
   "suffix": "@BBL A1",
   "process": [
    {
     "name": "0.08mm Extra Fine @BBL A1",
     "layer": 0.08,
     "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and longer printing time.",
     "descriptionEs": "En comparación con el perfil predeterminado de una boquilla de 0.4 mm, tiene una altura de capa más pequeña. Esto da como resultado líneas de capa casi insignificantes y un tiempo de impresión más largo.",
     "diff": {
      "bottom_shell_layers": "7",
      "bottom_color_penetration_layers": "7",
      "gap_infill_speed": "350",
      "inner_wall_speed": "350",
      "internal_solid_infill_speed": "350",
      "ironing_flow": "8%",
      "layer_height": "0.08",
      "sparse_infill_speed": "450",
      "support_bottom_z_distance": "0.08",
      "support_threshold_angle": "15",
      "support_top_z_distance": "0.08",
      "top_shell_layers": "9",
      "top_color_penetration_layers": "9",
      "top_shell_thickness": "0.8",
      "overhang_1_4_speed": "60",
      "overhang_2_4_speed": "30",
      "overhang_3_4_speed": "10"
     }
    },
    {
     "name": "0.08mm High Quality @BBL A1",
     "layer": 0.08,
     "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost negligible layer lines and much higher printing quality, but much longer printing time.",
     "descriptionEs": "En comparación con el perfil predeterminado de una boquilla de 0.4 mm, tiene una altura de capa más pequeña, velocidades y aceleraciones más bajas, y el patrón de relleno disperso es giroideo. Esto da como resultado líneas de capa casi insignificantes y una calidad de impresión mucho mayor, pero un tiempo de impresión mucho mayor.",
     "diff": {
      "bottom_shell_layers": "7",
      "bottom_color_penetration_layers": "7",
      "default_acceleration": "4000",
      "gap_infill_speed": "210",
      "inner_wall_speed": "120",
      "internal_solid_infill_speed": "150",
      "ironing_flow": "8%",
      "layer_height": "0.08",
      "outer_wall_speed": "60",
      "sparse_infill_pattern": "gyroid",
      "sparse_infill_speed": "150",
      "support_bottom_z_distance": "0.08",
      "support_threshold_angle": "15",
      "support_top_z_distance": "0.08",
      "top_shell_layers": "9",
      "top_color_penetration_layers": "9",
      "top_shell_thickness": "0.8",
      "top_surface_speed": "150",
      "outer_wall_acceleration": "2000",
      "overhang_1_4_speed": "60",
      "overhang_2_4_speed": "30",
      "overhang_3_4_speed": "10"
     }
    },
    {
     "name": "0.12mm Fine @BBL A1",
     "layer": 0.12,
     "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and higher printing quality, but longer printing time.",
     "descriptionEs": "En comparación con el perfil predeterminado de una boquilla de 0.4 mm, tiene una altura de capa más pequeña. Esto da como resultado líneas de capa casi insignificantes y una mayor calidad de impresión, pero un tiempo de impresión más prolongado.",
     "diff": {
      "bottom_shell_layers": "5",
      "bottom_color_penetration_layers": "5",
      "gap_infill_speed": "350",
      "inner_wall_speed": "350",
      "internal_solid_infill_speed": "350",
      "layer_height": "0.12",
      "sparse_infill_speed": "430",
      "support_bottom_z_distance": "0.12",
      "support_threshold_angle": "20",
      "support_top_z_distance": "0.12",
      "top_shell_thickness": "0.6",
      "overhang_1_4_speed": "60",
      "overhang_2_4_speed": "30",
      "overhang_3_4_speed": "10"
     }
    },
    {
     "name": "0.12mm High Quality @BBL A1",
     "layer": 0.12,
     "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost negligible layer lines and much higher printing quality, but much longer printing time.",
     "descriptionEs": "En comparación con el perfil predeterminado de una boquilla de 0.4 mm, tiene una altura de capa más pequeña, velocidades y aceleraciones más bajas, y el patrón de relleno disperso es giroideo. Esto da como resultado líneas de capa casi insignificantes y una calidad de impresión mucho mayor, pero un tiempo de impresión mucho mayor.",
     "diff": {
      "bottom_shell_layers": "5",
      "bottom_color_penetration_layers": "5",
      "default_acceleration": "4000",
      "gap_infill_speed": "230",
      "inner_wall_speed": "150",
      "internal_solid_infill_speed": "180",
      "layer_height": "0.12",
      "outer_wall_speed": "60",
      "sparse_infill_pattern": "gyroid",
      "sparse_infill_speed": "180",
      "support_bottom_z_distance": "0.12",
      "support_threshold_angle": "20",
      "support_top_z_distance": "0.12",
      "top_shell_thickness": "0.6",
      "top_surface_speed": "150",
      "outer_wall_acceleration": "2000",
      "overhang_1_4_speed": "60",
      "overhang_2_4_speed": "30",
      "overhang_3_4_speed": "10"
     }
    },
    {
     "name": "0.16mm High Quality @BBL A1",
     "layer": 0.16,
     "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in less apparent layer lines and much higher printing quality, but much longer printing time.",
     "descriptionEs": "En comparación con el perfil predeterminado de una boquilla de 0.4 mm, tiene una altura de capa más pequeña, velocidades y aceleraciones más bajas, y el patrón de relleno disperso es giroideo. Esto da como resultado líneas de capa menos evidentes y una calidad de impresión mucho mayor, pero un tiempo de impresión mucho mayor.",
     "diff": {
      "bottom_shell_layers": "4",
      "bottom_color_penetration_layers": "4",
      "default_acceleration": "4000",
      "inner_wall_speed": "150",
      "internal_solid_infill_speed": "200",
      "layer_height": "0.16",
      "outer_wall_speed": "60",
      "sparse_infill_pattern": "gyroid",
      "sparse_infill_speed": "200",
      "support_bottom_z_distance": "0.16",
      "support_threshold_angle": "25",
      "support_top_z_distance": "0.16",
      "top_shell_layers": "6",
      "top_color_penetration_layers": "6",
      "top_surface_speed": "150",
      "outer_wall_acceleration": "2000",
      "overhang_1_4_speed": "60",
      "overhang_2_4_speed": "30",
      "overhang_3_4_speed": "10"
     }
    },
    {
     "name": "0.16mm Optimal @BBL A1",
     "layer": 0.16,
     "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.",
     "descriptionEs": "En comparación con el perfil predeterminado de una boquilla de 0.4 mm, tiene una altura de capa más pequeña. Esto da como resultado líneas de capa menos aparentes y una mayor calidad de impresión, pero un tiempo de impresión más prolongado.",
     "diff": {
      "bottom_shell_layers": "4",
      "bottom_color_penetration_layers": "4",
      "gap_infill_speed": "300",
      "internal_solid_infill_speed": "300",
      "layer_height": "0.16",
      "sparse_infill_speed": "330",
      "support_bottom_z_distance": "0.16",
      "support_threshold_angle": "25",
      "support_top_z_distance": "0.16",
      "top_shell_layers": "6",
      "top_color_penetration_layers": "6",
      "overhang_1_4_speed": "60",
      "overhang_2_4_speed": "30",
      "overhang_3_4_speed": "10"
     }
    },
    {
     "name": "0.20mm Standard @BBL A1",
     "layer": 0.2,
     "description": "It has a general layer height, and results in general layer lines and printing quality. It is suitable for most general printing cases.",
     "descriptionEs": "Tiene una altura de capa normal y da como resultado líneas de capa y calidad de impresión promedio. Es adecuado para la mayoría de los casos de impresión.",
     "diff": {}
    },
    {
     "name": "0.20mm Strength @BBL A1",
     "layer": 0.2,
     "description": "Compared with the default profile of a 0.4 mm nozzle, it has more wall loops and a higher sparse infill density. So, it results in higher strength of the prints, but more filament consumption and longer printing time.",
     "descriptionEs": "En comparación con el perfil predeterminado de una boquilla de 0.4 mm, tiene más bucles de pared y una densidad de relleno más dispersa. Esto se traduce en una mayor fuerza de impresión, pero también en un mayor consumo de filamento y en un mayor tiempo de impresión.",
     "diff": {
      "outer_wall_speed": "60",
      "sparse_infill_density": "25%",
      "skeleton_infill_density": "25%",
      "skin_infill_density": "25%",
      "wall_loops": "6"
     }
    },
    {
     "name": "0.24mm Draft @BBL A1",
     "layer": 0.24,
     "description": "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but slightly shorter printing time.",
     "descriptionEs": "En comparación con el perfil predeterminado de una boquilla de 0.4 mm, tiene una altura de capa mayor. Esto da como resultado líneas de capa más evidentes y una calidad de impresión más baja, pero un tiempo de impresión ligeramente más corto.",
     "diff": {
      "gap_infill_speed": "230",
      "inner_wall_speed": "230",
      "internal_solid_infill_speed": "230",
      "layer_height": "0.24",
      "sparse_infill_speed": "230",
      "support_threshold_angle": "35",
      "top_shell_layers": "4",
      "top_color_penetration_layers": "4",
      "top_surface_line_width": "0.45"
     }
    },
    {
     "name": "0.28mm Extra Draft @BBL A1",
     "layer": 0.28,
     "description": "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time.",
     "descriptionEs": "En comparación con el perfil predeterminado de una boquilla de 0.4 mm, tiene una altura de capa mayor. Esto da como resultado líneas de capa más evidentes y una calidad de impresión más baja, pero un tiempo de impresión más corto.",
     "diff": {
      "gap_infill_speed": "200",
      "inner_wall_speed": "200",
      "internal_solid_infill_speed": "200",
      "layer_height": "0.28",
      "sparse_infill_speed": "200",
      "support_threshold_angle": "40",
      "top_shell_layers": "4",
      "top_color_penetration_layers": "4",
      "top_surface_line_width": "0.45"
     }
    }
   ]
  }
 ]
}